Home > news

Working principle and characteristics of stepper water boiler

2024-03-04
Step by step water boiler, as the name suggests, is an energy-saving water boiling device that heats water layer by layer from the bottom water inlet, gradually heating until the water is boiled. A water boiler that can improve the separation of hot and cold water while ensuring a healthy boiling process, alleviate the degree of "yin-yang water" generation, and ensure only one boiling through electrical energy control, thereby completely avoiding repeated heating; After heating and boiling 1 liter of water, another 1 liter of water is added from the bottom to heat until the water tank is full. The step-by-step filter can continuously dispense boiling water, avoiding the waiting time for traditional water boilers to take water only after the entire tank of water has been boiled;

Traditional water boilers rely on steam expansion to release water from the heating box to the insulation box, which is equivalent to countless boiling cycles; The stepper water heater relies on electrode temperature measurement, accurate temperature control, and a constant outlet water temperature of 96-99 ℃; Electronic leakage protection alarm function, electronic temperature control to prevent dry burning without water, and anti overflow and water leakage function.
After the correct installation of the water heater, connect the water source and power supply. When the liquid level control system senses that the water level has not reached the lower level (safe heating level), first connect the solenoid valve and the water heater starts to fill. At this point, the temperature displays the inlet water temperature. The water level indicator light and heating indicator light are not on;
When the water level reaches the lower liquid level (safe heating liquid level), the control board disconnects the solenoid valve, suspends water intake, and connects the heating system. At this time, the water level indicator light flashes, the heating indicator light is on, heating starts and water replenishment stops.
After heating to the set inlet water temperature, the system enters water again while heating continues; The amount of water intake each time is about 2 liters (depending on different models and water temperatures); Fill the water again and heat it until it reaches the upper liquid level. The water level indicator light will stay on and the water replenishment will stop; Continue heating until the temperature reaches the set temperature, and the heating indicator light will turn off.

The characteristics of a stepper water heater:
Automatic control - fully automatic microcomputer control, no manual operation required.
Energy saving and efficient - Compared to traditional water boilers, it can save more than 60% of energy, and the energy-saving machine series can even save more than 80%.
Continuous Water Supply - The revolutionary third-generation water boiler, which overturns tradition, adopts a unique bottom step water replenishment and layer by layer heating method. Water intake, replenishment, and heating are carried out simultaneously, ensuring a continuous supply of boiling water and reducing the mixing of raw water.
Easy to manage - there is almost no overflow or steam during use, and it will not cause pollution to the environment.
Safety and Health - According to the strictest Japanese JIS standards in the industry, five safety technologies are used: anti leakage design, anti dry burning design, fire retardant design, anti opening design, and shock and steam resistant design.
Perfect appearance - luxurious appearance, exquisite structure, giving people a refreshing feeling.
Easy to install - There are various installation forms, which can be hung on the wall, stand on the ground, or even stand on the ground with a base.